Pony srl: Products

Cables

Cavi

Pony srl: Products

Cables

PRODUCTS

Pony commercializes more than 500 types of cable in reels, available in stock or to order, to meet signal and power requirements. Unipolar and multipolar cables; sections from 0.14 to 4 mm2; homologations UL, CSA, HAR, IEMMEQU, CEI 20/22 II, UL SVT, PLTC Direct Burial and Sunlight Resistant; non-toxic, halogen-free cables; sheath available in several colours and materials such as polyurethane, pvc, silicone, caoutchouc, FEP, XLPE; shielded and unshielded cables, armed, twisted in pairs, Profibus, Device Net, Can open; cables for fixed and mobile installation, for high and low temperatures Pony makes cable cutting, sheathing and stripping according to the customer's request, as well as crimping and assembling terminals for small and large quantities on its own cables in stock or on account of manifacture. On customer's drawing, Pony also carries out spiral processing, starting from small quantities on polyurethane (PUR) cables, suitable for automation applications, and polyvinyl chloride (PVC), at a lower cost for uses such as, for example, lamps and lighting systems.

Flexible shielded multipolar cable with PVC insulation and sheath for control and data transmission.

LiYCY 300/500 Vac shielded signal cable

  1
  1. Multipolar flexible shielded cable, suitable for control and data transmission.
  2. Flexible conductor in red electrolytic copper or tinned copper
  3. PVC insulation TI2
  4. Electrolytic tinned copper braided screen
  5. PVC sheath TM2
  6. Working temperature -20/+70 °C
  7. Working voltage 300/500 Vac
PVC cable for installation in domestic environments, in humid environments, for connections subject to medium mechanical stress requiring heat resistance where the cables do not come into contact with hot parts and are not subject to thermal radiation.

Power cable H05V2V2-F

  1
  1. Cable suitable for installation on domestic and heating appliances where greater heat resistance is required and with connections under mechanical stress
  2. Flexible red electrolytic copper conductor
  3. PVC insulation type TI3
  4. PVC sheath type TM3
  5. Working temperature -20/+90 °C
  6. Working voltage 300/500 Vac
PVC cable for installation in domestic environments, for connection of light portable devices subject to weak mechanical stress requiring heat resistance.

Power cable H03V2V2-F

  1
  1. Cable suitable for installation on domestic appliances where greater heat resistance is required and with connections subject to weak mechanical stresses
  2. Flexible red electrolytic copper conductor
  3. PVC insulation type TI3
  4. PVC sheath type TM3
  5. Working temperature -20/+90 °C
  6. Working voltage 300/300 Vac
PVC cable for installation in domestic environments, humid environments for connections subject to medium mechanical stress as long as not in contact with hot parts and not subject to thermal radiation.

Power cable H05VV-F

  1
  1. Cable suitable for installation on domestic and heating appliances where greater heat resistance is required and with connections under mechanical stress
  2. Flexible red electrolytic copper conductor
  3. PVC insulation type TI2
  4. PVC sheath type TM2
  5. Working temperature -20/+70 °C
  6. Working voltage 300/500 Vac
Multi-pair halogen-free shielded polypropylene cable with polypropylene insulation and polyurethane external sheath for wiring equipment and electronic devices in outdoor use.

FPPOH2P cable

  1
  1. Halogen-free shielded multi-pair cable, resistant to microbial attack and hydrolysis.
  2. Flexible red electrolytic copper conductor
  3. Polypropylene insulation
  4. Tinned copper continuity conductor
  5. Electrolytic tinned copper braided screen
  6. Ether based polyurethane sheath
  7. Working temperature -40/+80 °C
  8. Working voltage 300 Vac
PVC cable for light or extra light service for portable light appliances used in houses, offices and shops.

Power cable H03VV-F

  1
  1. Cable for use with low or minimal risk of stress or mechanical damage, such as light portable devices used in houses, offices and shops.
  2. Flexible red electrolytic copper conductor
  3. PVC insulation type TI2
  4. PVC sheath type TM2
  5. Working temperature -20/+105 °C
  6. Working voltage 300/300 Vac
Flexible multipolar cable with PVC insulation and PUR sheath for control and command in electronic connection systems, measuring devices for outdoor use and for permanent immersion in water.

LiY11Y signal cable

  1
  1. Multipolar flexible cable, suitable for uses requiring good resistance against abrasion and impact or permanent immersion in water up to a depth of 10 metres.
  2. Flexible red electrolytic copper conductor
  3. PVC insulation TI1
  4. Thermoplastic PUR (TMPU) sheath with low friction coefficient
  5. Working temperature -40/+70 °C
  6. Working voltage 300 Vac
Flexible multipolar cable with PVC insulation and sheath for control and data transmission.

LiYY signal cable

  1
  1. Flexible multipolar cable, with PVC insulation and sheath, suitable for control and data transmission.
  2. Flexible red electrolytic copper conductor
  3. PVC insulation TI1
  4. PVC sheath type TM2
  5. Working temperature -20/+70 °C
  6. Working voltage 300 Vac
Flexible shielded multipolar cable with PVC insulation and sheath suitable for control and data transmission.

LiYCY shielded signal cable

  1
  1. Multipolar flexible shielded cable, suitable for control and data transmission.
  2. Flexible red electrolytic copper conductor
  3. PVC insulation type TI1
  4. Electrolytic tinned copper braided screen
  5. PVC sheath TM2
  6. Working temperature -20/+70 °C
  7. Working voltage 300 Vac
Flexible multipolar cable with heat resistant PVC insulation and sheath for control and data transmission.

LiYWYW signal cable

  1
  1. Flexible, heat-resistant, multipolar cable suitable for control and data transmission.
  2. Flexible conductor in red electrolytic copper or tinned copper
  3. PVC insulation 105°C
  4. PVC sheath 105°C
  5. Working temperature -20/+105 °C
  6. Working voltage 300 Vac
Flexible unipolar cable with heat-resistant PVC insulation for internal wiring of electrical equipment and motors.

LiYY signal cable 130°C

  1
  1. Heat resistant flexible unipolar cable, suitable for internal wiring of equipment and electric motors.
  2. Flexible conductor in red electrolytic copper or tinned copper
  3. PVC insulation 130°C
  4. PVC sheath 130°C
  5. Working temperature -40/+130 °C
  6. Working voltage 300 Vac
Flexible multipolar cable, with fireproof PVC insulation and sheath IEC 60332-3-24 for control and data transmission.

LiYY-A signal cable

  1
  1. Multipolar flexible fireproof cable according to IEC 60332-3-24, suitable for control and data transmission.
  2. Flexible red electrolytic copper conductor
  3. PVC insulation type R2
  4. PVC sheath type TM2
  5. Working temperature -20/+70 °C
  6. Working voltage 300 Vac
Flexible multipolar cable with heat resistant PVC insulation and sheath for control and data transmission.

LiYY-W signal cable

  1
  1. Flexible, heat-resistant, multipolar cable suitable for control and data transmission.
  2. Flexible red electrolytic copper conductor
  3. PVC insulation 105°C
  4. PVC sheath 105°C
  5. Working temperature -20/+105 °C
  6. Working voltage 300 Vac
Flexible separable strap with TPE insulation and highly flexible PVC sheath for battery cabling.

TWINFLEX TPE/PVC cable

  1
  1. Highly flexible detachable strap suitable for battery wiring.
  2. Extra-flexible conductor in class 6 made of red electrolytic copper
  3. TPE insulation with high thermal, mechanical and chemical resistance
  4. Transparent PVC external sheath type TM2
  5. Working temperature -35/+80 °C
  6. Working voltage 300/500 Vac
Flexible cable with PVC insulation and sheath for internal wiring of electronic equipment and devices.

AWM Style Cable 1061/2464

  1
  1. Flexible cable suitable for internal wiring of electronic equipment and devices.
  2. Flexible tinned electrolytic copper conductor
  3. Semi-rigid PVC insulation ( SRPVC )
  4. PVC sheath 80°C
  5. Working temperature -20/+80 °C
  6. Working voltage 300 Vac
Flexible cable with polypropylene insulation and polyurethane sheath for wiring electronic equipment and devices.

AWM Style cable 10493/20549

  1
  1. Flexible cable suitable for internal wiring of electronic equipment and devices.
  2. Extra-flexible red electrolytic copper conductor
  3. Polypropylene insulation
  4. Polyurethane sheath
  5. Working temperature -25/+80 °C
  6. Working voltage 300 Vac
Flexible unipolar cable insulated with UL and CSA approved PVC, for internal wiring or use in electronic devices not subject to mechanical stress and in fixed installation.

AWM Style 1569 I A/B cable

  1
  1. UL and CSA marked flexible unipolar insulated cable, for internal wiring or use in electronic devices not subject to mechanical stress and in fixed installation.
  2. Flexible tinned electrolytic copper conductor
  3. Special PVC insulation with high heat resistance
  4. Working temperature -20/+105 °C
  5. Working voltage 600 Vac
Unipolar cable with PVC insulation for electrical systems, systems and low-voltage components of motor vehicles, with non-fixed heat sources.

FLRY-B auto-motive cable

  1
  1. Unipolar flexible cable suitable for use on electrical systems, systems and low voltage components of motor vehicles, where exposure to heat sources is not fixed on the surface of the cable.
  2. Flexible red electrolytic copper rope conductor
  3. PVC insulation type B
  4. Working temperature -40/+105 °C
  5. Working voltage 50 Vac
Cable with PVC insulation and sheathing for internal and external wiring of electrical and electronic equipment.

AWM Style Cable 11109/2587

  1
  1. Flexible cable suitable for internal or external wiring of electronic equipment.
  2. Flexible tinned electrolytic copper conductor
  3. Special PVC insulation with high heat resistance
  4. Special PVC sheath with high heat resistance
  5. Working temperature -20/+90 °C
  6. Working voltage 600 Vac
PVC insulated flexible unipolar cable for electrical, electronic and control equipment with good heat resistance.

Multi-norm cable Style 1015 - TEW - H05V2-K/H07V2-K - BS6231

  1
  1. Unipolar cable in compliance with UL and CSA, EN 50525-2-3, BS6231 and European Low Voltage Directive No. 2006/95; suitable for internal wiring.
  2. Flexible tinned or red electrolytic copper conductor
  3. Special PVC insulation with high heat resistance
  4. Working temperature from -20 to +105 °C according to reference standard
  5. Working voltage 600 Vac, 300/500 Vac or 450/750 Vac according to reference standard
Flexible unipolar PVC insulated cable for internal wiring or use in electronic appliances.

AWM Style 1015 - TEW cable

  1
  1. Unipolar flexible cable with UL 758, UL 1581, C22.2 No. 210.2-M90 marks
  2. UL file No. E132504, CSA file No. LL 90483.
  3. Flexible or rigid electrolytic tinned copper conductor
  4. Special PVC insulation with high heat resistance
  5. Working temperature -20/+105 °C
  6. Working voltage 600 Vac
Unipolar PVC cable for wiring electrical and electronic equipment and switchboards.

MULTI-STANDARD cable SC 2.1

  1
  1. MULTI-STANDARD SC 2.1 unipolar power and control cable conforming to UL MTW VW-1, UL AWM style 1015 600 V, CSA TEW FT1, AR H07V-K.
  2. Conductor in thin tinned copper wires
  3. PVC insulation
  4. Working temperature from -40 to +105 °C according to reference standard
  5. Working voltage 600 Vac or 450/750 Vac according to reference standard