Magnetic switches

For thousands of machines and any configuration

Our magnetic switches cover a very wide range of machines thanks to their configurations: from models suitable for lateral insertion (if the cylinder has an open slot on at least one end) or installation from above (in the case of cylinders with a closed slot and little space at the ends), with cable outlet angled upwards for very short cylinders, or with holes for fixed mounting.

The reed sensors with which the switches are equipped have a reading range of between 8 and 12 mm and a sensitivity suitable for any type of cylinder.

We also produce customized switches with non-standard sensitivities, for example for use with materials that reduce their force at high temperatures.

The electronic switches have a reading field length of 5 mm and avoid the risk of double or triple switching

LED sensors, on the other hand, provide a bright visual indication when the signal is active, and a second power LED can also be installed.

The practicality of our magnetic switches allows them to be replaced without disconnecting the machine’s cables, thanks to models with M8 and M12 connectors.

  • Brackets and clamps

    • Clamps and brackets for fixing sensors on round cylinders
    • Clamps and brackets for fixing sensors on tie rod cylinders
    • Clamps and brackets for fixing sensors on mickey cylinders
    • Adapters for fasteners
    • Inductors for capacitive load installations
  • FBV

    • Dimensions: 33x15x22 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, with screw, with bracket
    • Casing material: Polyamide
  • FEK

    • Dimensions: 33x13x8 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: reed, T = 14 mm
  • FFA

    • Dimensions: 38x11x8 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C. – SWITCH
    • Assembly: on rear side, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: reed, T = 14 mm
  • FFV

    • Dimensions: 38x13x8 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C. – SWITCH
    • Assembly: on rear side, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: reed, T = 14 mm
  • FGV

    • Dimensions: 28x13x8 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 3 mm; reed, T = 9 mm
  • FGV – HALL EFFECT

    • Dimensions: 28x13x8 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 3 mm; reed, T = 9 mm
  • FLV

    • Dimensions: 19X04 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: without bracket
    • Casing material: stainless steel
    • Centre of the sensitive area, type without led: reed, T = 8 mm
  • FMV

    • Dimensions: 19X06 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: without bracket
    • Casing material: stainless steel
    • Centre of the sensitive area, type without led: reed, T = 10 mm
  • FNV

    • Dimensions: 19×08 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: without bracket
    • Casing material: Polyamide
    • Centre of the sensitive area, type without led: reed, T = 13 mm
  • FPA

    • Dimensions: 24x5x7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, without bracket, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 5 mm; reed, T = 8 mm
  • FPA – HALL EFFECT

    • Dimensions: 24x5x7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, without bracket, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 5 mm; reed, T = 8 mm
  • FPB

    • Dimensions: 25x11x7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C.
    • Assembly: with screw, without bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 5 mm; reed, T = 8 mm
  • FPB – HALL EFFECT

    • Dimensions: 25x11x7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C.
    • Assembly: with screw, without bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 5 mm; reed, T = 8 mm
  • FPC

    • Dimensions: 23x6x7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C. – SWITCH
    • Assembly: lateral, without bracket, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 5 mm; reed, T = 8 mm
  • FPC – HALL EFFECT

    • Dimensions: 23x6x7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C.
    • Assembly: lateral, without bracket, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 5 mm; reed, T = 8 mm
  • FPH

    • Dimensions: 30x5x7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, without bracket, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 5 mm; reed, T = 8 mm
  • FPH – HALL EFFECT

    • Dimensions: 30x5x7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, without bracket, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 5 mm; reed, T = 8 mm
  • FPV

    • Dimensions: 28×6,4×7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C. – SWITCH
    • Assembly: lateral, without bracket, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 10 mm; reed, T = 13 mm
  • FPV – HALL EFFECT

    • Dimensions: 28x6x7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C.
    • Assembly: lateral, without bracket, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 10 mm; reed, T = 13 mm
  • FTV

    • Dimensions: 22x9x16 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, with screw, with bracket
    • Casing material: Metal
    • Centre of the sensitive area: electronic, T = 4 mm; reed, T = 9 mm
  • FTV – HALL EFFECT

    • Dimensions: 22x9x16 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, with screw, with bracket
    • Casing material: Metal
    • Centre of the sensitive area: electronic, T = 4 mm; reed, T = 9 mm
    • Suitable for use on very fast piston cylinders