Archives: Products

  • Scopri Quick View

    AWM Style 1015 – TEW cable

    • Unipolar flexible cable with UL 758, UL 1581, C22.2 No. 210.2-M90 marks
    • UL file No. E132504, CSA file No. LL 90483.
    • Flexible or rigid electrolytic tinned copper conductor
    • Special PVC insulation with high heat resistance
    • Working temperature -20/+105 °C
    • Working voltage 600 Vac
  • Scopri Quick View

    AWM Style 1569 I A/B cable

    • UL and CSA marked flexible unipolar insulated cable, for internal wiring or use in electronic devices not subject to mechanical stress and in fixed installation.
    • Flexible tinned electrolytic copper conductor
    • Special PVC insulation with high heat resistance
    • Working temperature -20/+105 °C
    • Working voltage 300 Vac
  • Scopri Quick View

    AWM Style cable 10493/20549

    • Flexible cable suitable for internal wiring of electronic equipment and devices.
    • Extra-flexible red electrolytic copper conductor
    • Polypropylene insulation
    • Polyurethane sheath
    • Working temperature -25/+80 °C
    • Working voltage 300 Vac
  • Scopri Quick View

    AWM Style Cable 1061/2464

    • Flexible cable suitable for internal wiring of electronic equipment and devices.
    • Flexible tinned electrolytic copper conductor
    • Semi-rigid PVC insulation (SRPVC)
    • PVC sheath 80°C
    • Working temperature-20/+80 °C
    • Working voltage 300 Vac
  • Scopri Quick View

    AWM Style Cable 11109/2587

    • Flexible cable suitable for internal or external wiring of electronic equipment.
    • Flexible tinned electrolytic copper conductor
    • Special PVC insulation with high heat resistance
    • Special PVC sheath with high heat resistance
    • Working temperature -20/+90 °C
    • Working voltage 600 Vac
  • Scopri Quick View

    Brackets and clamps

    • Clamps and brackets for fixing sensors on round cylinders
    • Clamps and brackets for fixing sensors on tie rod cylinders
    • Clamps and brackets for fixing sensors on mickey cylinders
    • Adapters for fasteners
    • Inductors for capacitive load installations
  • Scopri Quick View

    CA

    • Connettore quadrato DIN43650A stile A 2 poli / 2 poli+terra
    • Rivestimento in gomma termoplastica
    • Guarnizione integrata
    • Contatto nichelato
    • Disponibile con contatto Fast-on per impieghi in ambienti con forti vibrazioni
    • Tensione di lavoro da 1 a 250 Vac/Vdc
    • Corrente nominale 10 A
    • Temperatura di lavoro -40°/+125°C nella versione senza elettronica, -40°/+70°C nella versione con elettronica
    • Grado di protezione IEC60529 IP65
    • Ampia varietà di cavi
    • Disponibile con sezione conduttori da 0,50 mm2 a 1,5 mm2
    • Disponibile nei colori nero e grigio
    • Disponibile con e senza elettronica
    • Nella versione con elettronica l’ultima lettera del codice indica la colorazione del led di segnalazione come segue : 0 = senza led, R = rosso, T = giallo, W = verde
  • Scopri Quick View

    CA

    • Connettore quadrato DIN43650A stile A 2 poli / 2 poli+terra
    • Rivestimento in poliuretano
    • Guarnizione integrata
    • Contatto nichelato
    • Tensione di lavoro da 1 a 250 Vac/Vdc
    • Corrente nominale 10 A
    • Temperatura di lavoro -40°/+125°C nella versione senza elettronica, -40°/+70°C nella versione con elettronica
    • Grado di protezione IEC60529 IP67
    • Ampia varietà di cavi
    • Disponibile con sezione conduttori da 0,50 mm2 a 1,5 mm2
    • Disponibile nei colori nero e grigio
    • Disponibile con e senza elettronica
    • Nella versione con elettronica l’ultima lettera del codice indica la colorazione del led di segnalazione come segue : 0 = senza led, R = rosso, T = giallo, W = verde
  • Scopri Quick View

    CA

    • Square connectorDIN43650A style A 2-poles / 2-poles+ground
    • Thermoplastic rubber coating
    • Integrated gasket
    • Nickel-plated contact
    • Working voltagefrom 1 to 250 Vac/Vdc
    • Nominal current 10 A
    • Working temperature-40°/+70°C
    • Degree of protectionIEC60529 IP65
    • Wide variety of cables
    • Available withconductor cross-sections from 0.50 mm2 to 1.5 mm2
    • Available in black and grey
  • Scopri Quick View

    CA Con elettronica e Led segnalazione

    • Connettore quadrato DIN43650A stile A 2 poli / 2 poli+terra
    • Rivestimento in poliuretano trasparente
    • Guarnizione integrata
    • Contatto nichelato
    • Tensione di lavoro da 1 a 250 Vac/Vdc
    • Corrente nominale 10 A
    • Temperatura di lavoro -40°/+70°C
    • Grado di protezione IEC60529 IP67
    • Ampia varietà di cavi
    • Disponibile con sezione conduttori da 0,50 mm2 a 1,5 mm2
    • L’ultima lettera del codice indica la colorazione del led di segnalazione come segue : R = rosso, T = giallo, W = verde
  • Scopri Quick View

    CA With electronics and signalling Led

    • Square connector DIN43650A style A 2-poles / 2-poles+ground
    • Transparent polyurethane coating
    • Integrated gasket
    • Nickel-plated contact
    • Working voltage from 1 to 250 Vac/Vdc
    • Nominal current 10 A
    • Working temperature -40°/+70°C in version with electronics
    • Degree of protection IEC60529 IP67
    • Degree of protection IEC60529 IP67
    • Available with conductor cross-sections from 0.50 mm2 to 1.5 mm2
    • The last letter of the code indicates the colour of the signalling LED as follows : R = red, T = yellow, W = green
  • Scopri Quick View

    CB

    • Adattatore per connettori
    • Adattamento rettangolo/quadrato e quadrato quadrato
    • Guarnizione integrata
    • Disponibile con e senza cavo
    • 2P , 2P+PE , 3P e 3P+PE
    • Temperatura testa: -40 +125 °C
    • Grado protezione IEC 60529: IP65
    • Materiale rivestimento: gomma termoplastica
    • Vite centrale completamente isolata
    • Applicazione: adattamento connettori, rubacorrente, ecc.
  • Scopri Quick View

    CC

    • Square connector EN175301-803 style A ISO4400
    • The series is symmetricaland can be rotated of 180°
    • Integrated gasket
    • 3P e 3P+PE
    • Working temperature: -40 +125 °C
    • Protection degree IEC 60529: IP65
    • Coating material: thermoplastic rubber
    • Available in black and grey
    • Available with and without electronics
    • Fully insulated central screw
    • Application with electrovalves, pressure switches, etc
  • Scopri Quick View

    CC

    • Square connector EN175301-803 style A ISO4400
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 3P e 3P+PE
    • Working temperature: -5 + 80 °C
    • Protection degree IEC 60529: IP67
    • Coating material: polyurethane
    • Available in black and grey
    • Available with and without electronics
    • Fully insulated central screw
    • Application with electrovalves, pressure switches, etc.
  • Scopri Quick View

    CC With electronics and signalling Led

    • Square connector EN175301-803 style A ISO4400
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 3P e 3P+PE
    • Working temperature: -5 +70 °C
    • Protection degree IEC 60529: IP67
    • Coating material: transparent polyurethane
    • Fully insulated central screw
    • Application with electrovalves, pressure switches, etc.
  • Scopri Quick View

    CE

    • Rectangular connector style B
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 2P and 2P+PE, contact spacing 11mm
    • Working temperature: -5 + 80 °C
    • Protection degree IEC 60529: IP67
    • Coating material: thermoplastic rubber
    • Available in black and grey
    • Available with and without electronics
    • Fully insulated central screw
    • Application with electrovalves
  • Scopri Quick View

    CE

    • Rectangular connector style B
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 2P and 2P+PE, contact spacing 11mm
    • Working temperature: -5 + 80 °C
    • Protection degree IEC 60529: IP67
    • Coating material: thermoplastic rubber
    • Available in black and grey
    • Available with and without electronics
    • Fully insulated central screw
    • Application with electrovalves
  • Scopri Quick View

    CE With electronics and signalling Led

    • Rectangular connector DIN43650B style B 2-poles / 2-poles+ground
    • Transparent polyurethane coating
    • Integrated gasket
    • Nickel-plated contact
    • Working voltage from 1 to 250 Vac/Vdc
    • Nominal current 10 A
    • Working temperature -40°/+80°C
    • Degree of protection IEC60529 IP67
    • Wide variety of cables
    • Available with conductor cross-sections from 0.50 mm2 to 1.5 mm2
    • The last letter of the code indicates the colour of the signaling LED as follows: R = red, T = yellow, W = green
  • Scopri Quick View

    CF

    • Rectangular connectorEN175301-803 style B ISO6952
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 2P and 2P+PE, contact spacing 10 mm
    • Working temperature: -5 + 80 °C
    • Protection degree IEC 60529: IP67
    • Coating material: polyurethane
    • Available in black and grey
    • Available with and without electronics
    • Fully insulated central screw
    • Application with electrovalves
  • Scopri Quick View

    CF

    • Rectangular connectorEN175301-803 style B ISO6952
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 2P and 2P+PE, contact spacing 10 mm
    • Working temperature: -5 + 80 °C
    • Protection degree IEC 60529: IP67
    • Coating material: polyurethane
    • Available in black and grey
    • Available with and without electronics
    • Fully insulated central screw
    • Application with electrovalves
  • Scopri Quick View

    CF With electronics and signalling Led

    • Rectangular connectorEN175301-803 style B ISO6952
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 2P and 2P+PE, contact spacing 10 mm
    • Working temperature: -5 +70 °C
    • Protection degree IEC 60529: IP67
    • Coating material: transparent polyurethane
    • Fully insulated central screw
    • Application with electrovalves
  • Scopri Quick View

    CK

    • Sensor connector FEK
    • 2P, contact spacing 6.4 mm
    • Working temperature: -40 +125 °C
    • Protection degree IEC 60529: IP65
    • Coating material: thermoplastic rubber
    • Fully insulated central screw
    • Application with sensors
  • Scopri Quick View

    CL

    • Micro connectorEN175301-803 style C ISO15217
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 2P, 2P+PE, 3P and 3P+PE, contact spacing 8mm
    • Working temperature: -5 + 80 °C
    • Protection degree IEC 60529: IP67
    • Coating material: polyurethane
    • Available in black and grey
    • Available with and without electronics
    • Fully insulated central screw
    • Application with electrovalves
  • Scopri Quick View

    CL With electronics and signalling Led

    • Micro connectorEN175301-803 style C ISO15217
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 2P, 2P+PE, 3P and 3P+PE, contact spacing 8mm
    • Working temperature: -5 +70 °C
    • Protection degree IEC 60529: IP67
    • Coating material: transparent polyurethane
    • Fully insulated central screw
    • Application with electrovalves
  • Scopri Quick View

    CN

    • Standard micro connector style C
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 2P, 2P+PE, 3P and 3P+PE, contact spacing 9.4 mm
    • Working temperature: -5 + 80 °C
    • Protection degree IEC 60529: IP67
    • Coating material: polyurethane
    • Available in black and grey
    • Available with and without electronics
    • Fully insulated central screw
    • Application with electrovalves
  • Scopri Quick View

    CN With electronics and signalling Led

    • Standard micro connector style C
    • The series is symmetrical and can be rotated of 180°
    • Integrated gasket
    • 2P, 2P+PE, 3P and 3P+PE, contact spacing 9.4 mm
    • Temperatura di lavoro: -5 +70 °C
    • Protection degree IEC 60529: IP67
    • Coating material: transparent polyurethane
    • Fully insulated central screw
    • Application with electrovalves
  • Scopri Quick View

    CP

    • Bipolar connector
    • 2P, contact spacing 16 mm
    • Integrated gasket
    • Working temperature: -40 +125 °C
    • Protection degree IEC 60529: IP65
    • Coating material: thermoplastic rubber
    • Available in black and grey
    • Application with electrovalves
  • Scopri Quick View

    CR

    • Rectifier connector
    • Integrated gasket
    • 2P and 2P+PE
    • Working temperature: -40 +70 °C
    • Protection degree IEC 60529: IP65
    • Coating material: thermoplastic rubber
    • Available in black and grey
    • Fully insulated central screw
    • Application with electrovalves
  • Scopri Quick View

    CZ

    • Integrated gasket
    • Cable input from square connector or bipolar connector
    • Working temperature: -40 +125 °C
    • Protection degree IEC 60529: IP65
    • Coating material: thermoplastic rubber
    • Available in black and grey
    • Application with electrovalves
  • Scopri Quick View

    FBV

    • Dimensions: 33x15x22 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, with screw, with bracket
    • Casing material: Polyamide
  • Scopri Quick View

    FEK

    • Dimensions: 33x13x8 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: reed, T = 14 mm
  • Scopri Quick View

    FFA

    • Dimensions: 38x11x8 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C. – SWITCH
    • Assembly: on rear side, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: reed, T = 14 mm
  • Scopri Quick View

    FFV

    • Dimensions: 38x13x8 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C. – SWITCH
    • Assembly: on rear side, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: reed, T = 14 mm
  • Scopri Quick View

    FGV

    • Dimensions: 28x13x8 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 3 mm; reed, T = 9 mm
  • Scopri Quick View

    FGV – HALL EFFECT

    • Dimensions: 28x13x8 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 3 mm; reed, T = 9 mm
  • Scopri Quick View

    FLRY-B auto-motive cable

    • Unipolar flexible cablesuitable for use on electrical systems, systems and low voltage components of motor vehicles, where exposure to heat sources is not fixed on the surface of the cable.
    • Flexible red electrolytic copper rope conductor
    • PVC insulation type B
    • Working temperature -40/+105 °C
    • Working voltage 50 Vac
  • Scopri Quick View

    FLV

    • Dimensions: 19X04 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: without bracket
    • Casing material: stainless steel
    • Centre of the sensitive area, type without led: reed, T = 8 mm
  • Scopri Quick View

    FMV

    • Dimensions: 19X06 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: without bracket
    • Casing material: stainless steel
    • Centre of the sensitive area, type without led: reed, T = 10 mm
  • Scopri Quick View

    FNV

    • Dimensions: 19×08 mm
    • Temperature of use: -20+70 °C
    • Contact: N.O. – N.C.
    • Assembly: without bracket
    • Casing material: Polyamide
    • Centre of the sensitive area, type without led: reed, T = 13 mm
  • Scopri Quick View

    FPA

    • Dimensions: 24x5x7 mm
    • Temperature of use: -20+120 °C
    • Contact: N.O. – N.C.
    • Assembly: on rear side, without bracket, with bracket
    • Casing material: Polyamide
    • Centre of the sensitive area: electronic, T = 5 mm; reed, T = 8 mm